CliniCare 10 is a mattress made of a three-layer foam core. The body of the mattress consists of a combination of cold polyurethane and thermoelastic foam. The upper part of the mattress consists of three ergonomic zones: head, body, feet. The area under the head and feet consists of three foams with differing density, hardness and profiles. The upper layer in these areas consists of thermoelastic foam, which is also perforated for better circulation of air between the skin and the mattress.
Thermoelastic foam: On the parts of the mattress where the patient’s head and feet are located, there is thermoelastic foam, which increases the preventive effect against the occurrence of pressure ulcers.
Reinforced edges of the foam core: Edges of the mattress are reinforced with stiffer PUR foam, which ensures the stability and safety of a patient lying down and support when sitting on the edge of the bed.
Transport handles: The transport handles on the side of the mattress cover can be used for better handling and easier relocation of the mattress. Three-layer foam core: The greater load capacity of the mattress and the preservation of patient comfort is attained thanks to the three foam layers.
The transport handles on the side of the cover can be used for better handling and easier relocation of the mattress.
Three-layer core with viscoelastic foam in the area of the head and feet. Due to the viscoelastic foam, the mattress has excellent preventive properties against the development of pressure ulcers.
Sides of the mattress made of stiffer foam. Edges of the mattress are reinforced with stiffer PUR foam, which ensures the stability and safety of a patient lying down and support when sitting on the edge of the bed.
86 cm or 90 cm
|Weight of the mattress||13 kg|
Three-layer core made of PUR and VISCO foam
Non-flammable (CRIB 5)
46, 50 and 52 kg/m3
Welded composite cover (PU + PVC), covered zip
Non-flammable (CRIB 7)
|Patient weight limit||200 kg|
With correct positioning of the patient, the mattress is suitable for patients with up to a fourth degree risk of the incidence of pressure ulcers.
The total weight of the mattress is 13 kg.
This mattress is suitable for patients with a maximum weight of 200 kg. Above this weight, the preventive anti-decubitus effects may be restricted, and the mattress may be deformed.
The CliniCare 10 mattress is standardly standardly available in sizes 200x86x14 cm and 200x90x14 cm. Special requirements for other dimensions can be dealt with on an individual basis.
The mattress cover is made of a flexible vapour-permeable material with a concealed zip.
The mattress core consists of a double layer of cold polyurethane foam and thermoelastic foam.
Prices of products are calculated individually. We always find customized solutions. For more information or an offer please fill out the form below.
User manual PRIMACARE 10, PRIMACARE 20, EFFECTACARE 20, CLINICARE 10, CLINICARE 30, CLINICARE 20